Product has been added to your cart.
info@electricfenceskenya.com0722 708034

Work Method Statement for Electric Fence Installation in Kenya

  1. Introduction

This method statement outlines the procedure for an Electric Fence Installation in Kenya. The purpose is to ensure that the work is carried out safely, efficiently, and in compliance with all relevant regulations and standards.

  1. Scope of Work

The scope of this work involves the installation of an electric fence around a specified perimeter. This includes the erection of posts, installation of fence wires, connection of the energizer, grounding, testing, and commissioning of the system.

  1. Responsibilities
  • Project Manager: Overall responsibility for the project, ensuring all work is completed to specifications. Our team was lead by Allan Kamau.
  • Site Supervisor: On-site management of the installation process, including supervision of workers and ensuring safety measures are adhered to.
  • Electricians/Technicians: Responsible for the installation of the electric fence components and system wiring.
  • Safety Officer: Ensures that all safety protocols are followed during the installation.
  1. Materials and Equipment
  • Fence Posts: 25mm by 25mm by 1m steel posts.
  • End Insulators: These are used to secure the wires to the posts.
  • 1.6mm2 High-Tensile Wires: Galvanized steel wire.
  • Nemtek Druid 28 Energizer: Power source for the fence.
  • 450mm Diameter Razor Wire: Concertina wire around the perimeter.
  • Grounding Rods: For grounding the system.
  • Paint: Gross paint is used on all fencing posts.
  • Top caps to close the tops of the fencing posts.
  • Alarm System: Siren and strobe kit.
  • Hatari/Danger Warning Signs: To be placed on the fence.
  • Tools: Drills, screwdrivers, pliers, tensioners, crimping tools, measuring tape, spirit level.
  • Personal Protective Equipment (PPE): Helmets, gloves, safety boots, reflective vests, eye protection.
  1. Safety Precautions
  • Conduct a site risk assessment before commencing work.
  • Ensure all workers wear appropriate PPE at all times.
  • Mark the work area with warning signs and barriers.
  • De-energize the system during installation to prevent accidental shock.
  • Ensure proper grounding of the system to avoid electrical hazards.
  • Only trained and certified personnel should handle the electrical components.
  1. Procedure

6.1 Site Preparation

  1. Survey the Site: Mark the perimeter where the electric fence will be installed. Identify any potential obstacles or hazards.
  2. Clear the Area: Remove vegetation, debris, or any obstructions along the fence line.

6.2 Post Installation

  1. Install Posts: Place the posts in the holes, ensuring they are vertically aligned
  2. Install Corner and End Posts: Ensure that these posts are stronger and more stable, as they will bear the most tension.

6.3 Wire Installation

  1. Install Insulators: Attach insulators to the posts at the specified heights. These will hold the wires and prevent grounding.
  2. String the Wires: Begin at one corner and run the wire through the insulators along the fence line. Ensure the wire is taut and secure it at each end post.
  3. Tension the Wires: Use a wire tensioner to ensure the wires are properly tensioned. Check for even spacing between wires.
  4. Install Additional Components: Install danger hatari warning signs

6.4 Energizer Installation

  1. Mount the Energizer: Install the energizer in a secure, dry location, protected from the elements. Follow the manufacturer’s instructions for mounting and connection.
  2. Connect the Wires: Attach the fence wires to the energizer terminals according to the wiring diagram provided by the manufacturer.
  3. Install Grounding Rods: Drive the grounding rods into the ground near the energizer. Connect these to the energizer using grounding wire.

6.5 Testing and Commissioning of Electric Fence Installation in Kenya

  1. Inspect the System: Check all connections, wire tension, and component installation for compliance with the project specifications.
  2. Test the Energizer: Power on the energizer and use a voltmeter to ensure the system is functioning correctly. Check for consistent voltage along the entire fence line.
  3. Install Warning Signs: Place warning signs at regular intervals along the fence, in compliance with safety regulations.

6.6 Handover and Documentation

  1. Final Inspection: Conduct a final inspection with the client to ensure satisfaction with the installation.
  2. Provide Documentation: Deliver all relevant documentation, including user manuals, maintenance instructions, and warranty information.
  3. Training: Provide basic training to the client on operating and maintaining the electric fence system.
  1. Quality Control
  • Conduct regular inspections throughout the installation process.
  • Document all work completed, including any deviations from the original plan.
  1. Emergency Procedures
  • In case of electrical shock, immediately de-energize the system and administer first aid.
  • For any accidents or incidents, report to the Safety Officer and follow emergency response procedures.
  1. Completion and Handover of Electric Fence Installation in Kenya

Upon completion of the installation, ensure the work area is clean and all tools and equipment are removed. Handover the completed electric fence system to the client, ensuring they are fully informed of its operation and maintenance requirements.